Mitsubishi Electric 800 Series, Инструкция по эксплуатации, Страница: 345 / 727

(M) Monitor display and monitor output signal
344
PARAMETERS
5.11
(M) Monitor display and monitor output
signal
Purpose Parameter to set
Refer to
page
To display the motor speed.
To set to rotations per minute.
Speed display and
rotations per minute
setting
P.M000 to P.M002,
P.D030 Pr.37, Pr.144,
Pr.505, Pr.811
345
To change the monitored item on
the operation panel and parameter
unit
Operation panel
monitored item
selection,
clearing the cumulative
monitor P.M020 to P.M023,
P.M030, P.M031,
P.M044, P.M045,
P.M050 to P.M052,
P.M100 to P.M103
Pr.52, Pr.170,
Pr.171, Pr.268,
Pr.290, Pr.563,
Pr.564,
Pr.774 to Pr.776,
Pr.891, Pr.1018,
Pr.1106 to Pr.1108
347
To change the monitored item
output from the terminals FM and
AM
Terminal FM function
selection
P.M040 to P.M042,
P.M044, P.M300,
P.M301, P.D100
Pr.54, Pr.55,
Pr.56, Pr.158,
Pr.290, Pr.291,
Pr.866
357
To adjusting the terminal FM and
AM output Terminal FM, AM
calibration P.M310, P.M320,
P.M321 Pr.867, Pr.900,
Pr.901
362
To check the effects of energy
saving
Energy saving monitor
P.M023, P.M100,
P.M200 to P.M207,
P.M300, P.M301 Pr.52, Pr.54,
Pr.158, Pr.891 to
Pr.899
365
To assign functions to the output
terminals Output terminal function
assignment P.M400 to P.M406,
P.M431 Pr.190 to Pr.196,
Pr.289
370
To detect the output frequency
Up-to-frequency
sensitivity
Output frequency
detection
Low speed detection
P.M440 to P.M446
Pr.41 to Pr.43,
Pr.50, Pr.116,
Pr.865, Pr.870
379
To detect the output current
Output current detection
Zero current detection
P.M460 to P.M464
Pr.150 to Pr.153,
Pr.166, Pr.167
382
To detecting the output torque Output torque detection P.M470 Pr.864 384
To use the remote output function Remote output P.M500 to P.M502 Pr.495 to Pr.497 385
To use the analog remote output
function
Analog remote output P.M530 to P.M534 Pr.655 to Pr.659 386
To output the fault code from a
terminal Fault code output
function
P.M510 Pr.76 388
To detect the specified output
power Pulse train output of
output power
P.M520 Pr.799 389
To detect the control circuit
temperature Control circuit
temperature monitor
P.M060 Pr.663 390
To monitor pulses
Cumulative pulse
monitor
P.M610 to P.M613 Pr.635 to Pr.638 227
To output divided encoder pulses
Encoder pulse dividing
output
P.M600, P.M601 Pr.413, Pr.863 391