background image

 

2.  TV Menus 

37

For assistance call 1(800) 332-2119

Lock, continued

Lock

 

Time

 
Blocks all use of the TV during the time period you specify.  You must enter a pass code to use 
the TV when the time lock is in effect. 

Lock by Time

Enables/disables 

Lock by Time

.

Lock Time, 

Unlock Time

To set the lock and unlock times:

1. 

Highlight the lock or unlock time.

2. 

Press 

ENTER

 to start editing.

3. 

Press     to make changes.

4. 

Press 

ENTER

 to confirm changes.

Note:

 To make Lock by Time active 24 hours a day, set 

Start Time

 and 

Stop Time

 the same.

Lock

Channel

The 

Channel Lock

 menu lists channels currently in memory (see page 30).  Highlight a 

channel and press 

ENTER

 to lock ( ) or allow (

) the channel.  Channels locks will be 

cleared the next time you perform a channel scan.

Lock

 

 Panel

Off, On On

 locks and 

Off

 unlocks the buttons on the TV’s control panel.  Use this option if small children try 

to press TV buttons.

• 

To release the Panel Lock from the TV’s control panel, press and hold the 

INPUT

 button for ten 

seconds.  If the TV is powered off, press 

POWER

 after the lock releases to make the TV power on.

• 

To reactivate the lock, return to this menu and change the setting to 

On

.

Lock

Other

Other Menu Options (alternate rating system)

This TV can recognize new rating systems that may come into effect in the future.  Such alter-
nate rating systems will apply only to digital programming received on the 

ANT

 input.

Lock On, Off

Enables/disables program blocking.

System

The rating system available for the channel.

Group

Rating groups available in the rating system shown on the screen.  Rating groups are defined by the 
rating system in effect.

Rating

Rating restrictions available in the selected rating system and group.  Highlight the rating and press 

ENTER

 to check (block) or uncheck (allow) rated content.

Содержание 3D DLP 742 Series































































Отзывы: