Mitsuba GOT1000, Руководство пользователя

Страница: 420 / 532

16
- 2
16.1 Maintenance Timing Setting
16.1.1 Function of the maintenance timing setting
16.1 Maintenance Timing Setting
16.1.1 Function of the maintenance timing setting
When use maintenance time notification function, battery and option function button are required.
When setting the maintenance notifying time, refer to the life descrived in Section 3.2 Performance
Specifications as a guide to set time or count.
The maintenance time notification is output by the following two methods.
• Outputs to GOT special register (GS680).
• Outputs as system alarm
For details of the GOT special register and system alarm, refer to the following.
GT Designer2 Version Screen Design Manual
Switching OFF the maintenance time notification output
The maintenance time notification setting which has been set once is not switched
OFF even if changing its setting.
Switch OFF the maintenance time notification by the following methods.
• Execute addition time reset.
• Switch OFF each bit of "maintenance time notification cancel information
(GS638)".
Item Description Setting range Unit
Maintenance
points
Reference
page
Backlight
maintenance time
notification period.
(0 to 100000 hour)
Sets energization time for the maintenance
notification output.
When 0, no message notification.
The time is counted only when backlight is lit,
in every ten minutes.
0 to 100
<At factory
shipment: 0>
1000
hours
18-5
Display section
maintenance time
notification period
(0 to 100000 hour)
Sets energization time for the maintenance
notification output.
When 0, no message notification.
The time is counted only when energized, in
every ten minutes.
0 to 100
<At factory
shipment: 0>
1000
hours
Touch key
maintenance time
notification count
(0 to 2000000times) Sets touch key touching count for the
maintenance notification output.
When 0, no message notification.
Counts by every screen touch.
0 to 200
<At factory
shipment: 0>
10000
times
Built-in flash memory
maintenance time
notification count
(0 to 1000000times)
Sets built-in flash memory writing count for the
maintenance notification output.
When 0, no message notification.
Counts by every writing in built-in flash
memory.
0 to 200
<At factory
shipment: 0>
1000
times