Chapter 19 TR-069 Client
190
The following table describes the fields in this screen.
Table 79
Maintenance > TR-069 Client
LABEL
DESCRIPTION
CWMP
Select
Enable
to allow the Device to be managed by a management server. Otherwise,
select
Disable
to not allow the Device to be managed by a management server.
ACS URL
Enter the URL or IP address of the auto-configuration server.
ACS User
Name
Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password
Enter the TR-069 password for authentication with the auto-configuration server.
Connection
Request Path
Type the IP address or domain name of the Device. The management server uses this path
to verify the Device.
Connection
Request Port
The default port for access to the Device from the management server is the HTTP port,
port 80. If you change it, make sure it does not conflict with another port on your network
and it is recommended to use a port number above 1024 (not a commonly used port). The
management server should use this port to connect to the Device. You may need to alter
your NAT port forwarding rules if they were already configured.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the Device, this user name is used to
authenticate the ACS.
Connection
Request
Password
Enter the connection request password.
When the ACS makes a connection request to the Device, this password is used to
authenticate the ACS.
Inform
Select
Enable
for the Device to send periodic inform via TR-069 on the WAN. Otherwise,
select
Disable
.
Inform
Interval
Enter the time interval (in seconds) at which the Device sends information to the auto-
configuration server.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore the screen’s last saved settings.
