Mitra 3D Mic Pro, Инструкция по эксплуатации

Страница: 13 / 21

• Connect the
3D Mic Pro
to your audio recorder or a video camera
• Turn on the
3D Mic Pro
• Adjust the recording level in your camera or audio recorder
• Start
Recording
• Stop recording
• Turn o ff the
3D Mic Pro
3D Mic Pro
is designed for long ba ery life. A
pair of 9V Alkaline LP3 ba ery will power it for 12
hours.
The two ba ery fuel gauges A and B indicate
the voltages of ba ery A and B respec vely. The
ba ery IDs are marked at the bo om le corner
of the ba ery clamps
When the
3D Mic Pro
is tuned on, and both
the ba eries are within opera ng voltage range,
the gauges glow green.
When any ba ery voltage falls to approximately 7
volt, the corresponding ba ery gauge turns red. At this point the microphone may s ll work
for several minutes but you should promptly replace that ba ery.
Both ba eries are within opera ng voltage range
Ba ery `A’ voltage is low, needs replacement
13