CS38 / CS41 SELECT Chainsaw
9
Original Instructions Version July 16
CS38-41_130716
•
Maintain full engine speed when cutting.
•
Never allow other persons to come within the work area as doing so might expose them to
danger.
•
If a branch or other object gets caught in the blades during operation, always turn off the
engine before removing the object.
•
To protect yourself against injury from falling branches, wear the required safety equipment.
•
Keep the operation area clear of all persons, particularly small children and pets. Injury may
result from flying debris.
•
Never touch the spark plug or plug HT cable while
the engine is in operation, doing so may result in
an electrical shock.
•
Never touch the exhaust, spark plug or any metallic parts of
the engine while the engine is in operation or immediately
after shutting down the engine. These parts reach high
temperatures during operation and doing so could result
in serious burns.
•
When you finish cutting in one location and wish to continue work in another area, turn off the
engine, place the protective cover over the blades, and turn the chain saw so that the blades
face away from your body before carrying it to the new location.
•
Always remove fuel from the fuel tank before transportation to prevent fuel spillage.
•
When not in use never leave the chain saw exposed to direct sunlight as this can heat the fuel
tank and may cause a discharge of fuel, and flood the engine.