Mitox 6000HTDX, Руководство пользователя, Страница: 15 / 17

14
CARBURETTOR

The carburettor mixture setting has been set at the factory and will not need adjusting.

Adjusting the idle speed Fig 12, if adjustment is necessary turn the T screw clockwise until the
blades start to move, then turn the screw T anticlockwise until the blades stop.
T
screw

If the idle speed cannot be adjusted to stop the blades moving at idle, contact your dealer
for repair before use.
STORAGE

Oil the blades to prevent rust.

Remove the spark plug, pour a small amount of oil into the cylinder. Rotate the crankshaft several
times using the starting rope in order to distribute the oil. Put the spark plug back in.

Remove the fuel from the machine.
TROUBLESHOOTING
Engine will not start, power loss.

Check that the fuel tank is not empty. Fill with mixed fuel.

The fuel does not reach the carburettor. Change the fuel filter in the fuel tank.

There is water in the fuel. Drain and clean the fuel system.

The air filter is dirty. Clean or replace the air filter.

There are carbon deposits in the exhaust muffler restricting the engine. Clean or change
the muffler.

Spark plug is worn. Replace spark plug.
Fig 12,