Mitox 28PP, Руководство оператора

Страница: 17 / 44

28PP Pole Pruner
17
Original Instructions Version December 15
Chain Oil
Filling the Oil Reservoir
• Fill the chain oil tank with low
viscosity chain oil or Mitox Chain Oil
this is availble online at
www.mitox.co.uk or at your local dealer.
• Do not use waste or regenerated oil that can cause damage to the oil pump.
• The oil reservoir has a capacity sufficient to provide about 20 minutes of cutting time. Be sure to
refill the oil tank every time when refuelling the saw.
Checking the Oil Supply
• After starting the engine, run the
chain at medium speed and see
if chain oil is thrown off as shown.
Adjusting the Oil Flow Rate
Never fill the oil reservoir or adjust the oiler with the engine running.
• An increase in bar oil flow rate will speed oil consumption, requiring more frequent checks on
the oil reservoir.
• The guide bar and chain are lubricated automatically by a pump that operates whenever
the chain rotates. The pump is set at the factory to deliver a minimum flow rate, but it can be
adjusted in the field. A temporary increase in oil flow is often desirable when cutting hardwood.
NOTE