Mitox 25C SELECT Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 32

Mitox 25C SELECT Скачать руководство пользователя страница 12

25C SELECT Grass Trimmer

12

Original Instructions Version June 16

Fuel Storage (Without Ethanol Shield)

Mixed two-stroke fuel which has been left unused for a period of one month or more may
damage the carburettor and result in the engine failing to start or operate correctly.

When storing the Grass Trimmer for a period of more than one month, empty the fuel tank, and
run the engine to empty the carburettor of fuel.

Two stroke fuel can cause deterioration of rubber and/or plastic components during prolonged
storage.

It is important to only use good quality, fresh fuel mix.

Fuelling

Shake the fuel container to thoroughly mix the two-stroke oil and petrol.

Clean dirt from around the fuel cap before removing.

Pour two-stroke fuel into the fuel tank with a filtered funnel, up to 80% of the fuel tank’s capacity.

Replace the fuel cap and tighten securely. Spilled fuel must be wiped away from the Grass
Trimmer before starting the engine.

Move at least 5m away from the refuelling area before restarting the engine.

When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look
around to make sure that there are no sparks or open flames anywhere nearby before refuelling.

«
...
10
11
12
13
14
...
»

Содержание 25C SELECT

































Отзывы:

Нет отзывов