Miteq DNB-2B Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 55

background image

17

3.2.2 MAIN MENU

If not already displayed, use the MENU key to access the Main Menu.

The main menu is the default menu at power-up. This menu provides access to the following
parameters of the frequency converter:

•

L: LO or Translation Frequency

•

I: Input Frequency Band (Factory set and displayed for informational purposes only)

•

O: Output Frequency Band (Factory set and displayed for informational purposes only)

•

ATT: Attenuation

•

Tx or Rx: Mute Status (If Applicable)

•

MEM: Memory Registers

•

Setup Title (12 Characters)

L: LO Frequency (Translation Frequency)
To change the LO Frequency:

•

Press the “CURSOR” key to select the LO Frequency field on the display.

•

Use the numeric data entry keys to enter the desired LO Frequency, or the up and down
arrow keys to scan through the valid LO Frequencies.

•

Press “ENT” to tune the unit to the desired frequency.

I: Input Frequency Band
The Input Frequency Band that the unit operates at is set at the factory and is displayed for
informational purposes only. This parameter is not user selectable.

O: Output Frequency Band
The Output Frequency Band that the unit operates at is set at the factory and is displayed for
informational purposes only. This parameter is not user selectable.

ATT: Attenuation
To change the attenuation setting of the unit:

•

Press the “CURSOR” key to select the attenuation field on the display.

•

Use the numeric data entry keys to enter the desired attenuation or the up and down arrow
keys to increment or decrement the attenuation.

•

If the numeric data entry keys were used, press “ENT” to set the displayed attenuation.

Tx/Rx: Mute Status (Upconverters) (If Applicable)
The operator can mute the output of the converter as long as the unit is not in an alarm state. If
the unit is in an alarm state, there is no operator override of the Mute. To mute the output of the
converter:

•

Press the “CURSOR” key to select the “Tx or Rx” field.

•

Use the arrow keys to toggle between ON and MUTE until the desired setting is displayed.

•

Press “ENT” to apply the selection.

L:11.250GHz I:12.20-12.75 O: 0.95- 1.50

ATT:26.6dB Rx:MUTE MEM: SETUP

«
...
15
16
17
18
19
...
»

Содержание DNB-2B
























































Отзывы:

Нет отзывов

Похожие инструкции для DNB-2B

Бренд: Palmer Страницы: 2

Бренд: Promax Страницы: 14

Бренд: RGBlink Страницы: 13

Бренд: ZyXEL Communications Страницы: 131

Бренд: Nexen Страницы: 13

HDMI Super Booster Plus

Бренд: Gefen Страницы: 10

Бренд: Digitus Страницы: 4

Бренд: Goobay Страницы: 4

Бренд: Hoymiles Страницы: 2

Бренд: Microchip Technology Страницы: 24

Бренд: Radial Engineering Страницы: 12

Бренд: Ensemble Designs Страницы: 27

Бренд: Wolverine Страницы: 14

Бренд: Emheater Страницы: 30

Бренд: Stealth Страницы: 12

Бренд: Kramer Страницы: 12

Pure Sine PST-100S-12E

Бренд: Samlexpower Страницы: 48

Бренд: oventrop Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды