T.38 Fax Transmission
10
Configuring the Behavior of the T.38 INVITE Not Accepted
This task allows you to set the unit’s behaviour after receiving an error to a SIP INVITE for
T.38 fax.
If you are not familiar with the meaning of the fields, click Show Help, located at the upper right
corner of the Web page, to display field description when mousing over the field name.
Steps
1. Go to SIP > Interop.
2. In the Behavior on T.38 INVITE Not Accepted table, from the Behavior selection list, set the
required behavior for each SIP Error Code.
3. Click Apply.
