Mitel SX-200 ICP - 1.0 5020, Руководство техника

Страница: 19 / 360

11
Introduction
DSP configurations
The table below lists some DSP requirements for the system. The
requirements are guidelines only; the actual number of DSPs needed
depends on the intended use of the system. The DSP Configuration
Option (Form 4, Option 132) to use with the CX/CXi is BUSINESS 1 as
shown in Table 3:
Table 3: DSP Configurations
DSP Configuration Without Compression
With
Compression
Base System (2 total) 3 three-party conf.
4 voice mail ports
0 G.729 channels
24 IP phones
8 ONS phones
12 LS/CLASS trunks
0 T1 ccts
Base + T1/E1 Combo
(3 total)
10 three-party conf.
16 voice mail ports
0 G.729 channels
64 IP phones
24 ONS phones
12 LS/CLASS trunks
24 T1 or 23 PRI ccts
Base + Dual DSP
(4 total)
10 three-party conf.
16 voice mail ports
0 G.729 channels
40 IP phones
40 ONS phones
16 LS/CLASS trunks
0 T1 ccts 3 three-party conf.
4 voice mail ports
8 G.729 channels
40 IP phones
8 ONS phones
12 LS/CLASS trunks
0 T1 ccts
Base + T1/E1 Combo +
Dual DSP
(5 total)
10 three-party conf.
16 voice mail ports
0 G.729 channels
80 IP phones
100 ONS phones
12 LS/CLASS trunks
24 T1 or 23 PRI ccts 10 three-party conf.
16 voice mail ports
8 G.729 channels
80 IP phones
100 ONS phones
12 LS/CLASS trunks
24 T1 or 23 PRI ccts
Base + Quad DSP
(6 total)
10 three-party conf.
16 voice mail ports
0 G.729 channels
80 IP phones
100 ONS phones
36 LS/CLASS trunks
0 T1 10 three-party conf.
16 voice mail ports
8 G.729 channels
80 IP phones
56 ONS phones
36 LS/CLASS trunks
0 T1
(Page 1 of 2)