Mitel Superset 4025 Скачать руководство пользователя страница 23

Страница: 23 / 49

-19-

Call Forward (No Internal/External Split - Enhanced)

Call Forward lets you redirect incoming calls to an alternate number. "Always

Forward?" redirects all incoming calls regardless of the state of your
telephone. "When No Answer?" redirects calls after several rings if you don't

answer. "When Set's Busy?" redirects calls when your telephone is busy.
"Busy/No Answer?" redirects calls when your telephone is busy or when you

don't answer.

Note:

For information about "I'm Here?", see Call Forward - I'm Here.

To program Call Forward:

1. Press

SUPERKEY

2. Press the

softkey until "Call Forwarding?" appears.

3. Press the

Yes

softkey.

4. Press the

Program

Change

softkey key to program Call Forward

Always or the

Next

softkey to program another type of call forward.

The presence of an asterisk indicates that call forwarding is turned on.

5. Dial the destination number.
6. Press the

Save

softkey.

To turn Call Forward on and off (once it has been programmed):

1. Press

SUPERKEY

2. Press the

softkey until "Call Forwarding?" appears.

3. Press the

Yes

softkey.

4. Press the

Change

softkey.

5. Do one of the following:

To turn Call Forward Always on or off, press the

Change

, softkey,

and then the

Turnoff

Turnon

softkey.

To turn another type of Call Forward on or off, press the

Next

softkey

until you reach the desired display, and then press the

Change

followed by the

TurnOff

Turnon

softkey.

To turn off call forwarding and delete the destination, press the

Del

softkey.

Содержание Superset 4025


















































Результаты поиска

Содержание Superset 4025

Отзывы:

Похожие инструкции для Superset 4025

Бренды по названию

Популярные бренды

Mitel Superset 4025, Руководство пользователя

Результаты поиска

Содержание Superset 4025

Отзывы:

Похожие инструкции для Superset 4025

Бренды по названию

Популярные бренды