manualshive.com logo in svg

Mitel SUPERCONSOLE 1000 SX-200, Руководство пользователя

Поделиться
Скачать
Mitel SUPERCONSOLE 1000 SX-200 Скачать руководство пользователя страница 2

2

SUPERCONSOLE 1000

®

 User Guide

NOTICE

The information contained in this document is believed to be accurate in all respects but is
not warranted by Mitel Networks™ Corporation (MITEL

®

). The information is subject to

change without notice and should not be construed in any way as a commitment by Mitel or
any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no
responsibility for any errors or omissions in this document. Revisions of this document or new
editions of it may be issued to incorporate such changes.

No part of this document can be reproduced or transmitted in any form or by any means -
electronic or mechanical - for any purpose without written permission from Mitel Networks
Corporatio

n.

Mitel Networks is a trademark of Mitel Networks Corporation.

Other product names mentioned in this document may be trademarks of their respective 
companies and are hereby acknowledged.

NOTICE TO CANADIAN CUSTOMERS

This Class A digital appartus complies with Canadian ICES-003.

NOTICE TO U.S. CUSTOMERS

This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in a residential 
area is likely to cause harmful interference in which case the user will be required to correct 
the interference at his own expense.

Note: 

Changes or modifications not expressly approved by Mitel Networks™ Corporation 

may void the user’s right to operate the equipment.

NOTICE TO CUSTOMERS IN EU COUNTRIES

The CE mark on this product indicates that this product is in compliance with the 89/336/EEC 
EMC directive, Class B emissions. As a result it is only intended for use in a commercial or 
light industrial environment as defined in EN5022. This product complies with 73/23/EEC Low 
Voltage Directive.

50004006, Rev. B

October 2004

®, ™Trademark of MITEL Networks Corporation.

© Copyright 2004, MITEL Networks Corporation

All rights reserved.

Содержание SUPERCONSOLE 1000 SX-200































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды