Mitel MiVoice 5000 Скачать руководство пользователя страница 2

Страница: 2 / 28

Notice

The information contained in this document is believed to be accurate in all respects but is not warranted by

Mitel Networks™

Corporation (MITEL

)

. The information is subject to change without notice and should not be construed in any way as a commit

ment by Mitel or any of its affiliates or subsidiaries. Mitel and its affiliates and subsidiaries assume no responsibility for any errors

or omissions in this document. Revisions of this document or new editions of it may be issued to incorporate such changes.No

part of this document can be reproduced or transmitted in any form or by any means - electronic or mechanical - for any purpose

without written permission from Mitel Networks Corporation.

Trademarks

The trademarks, service marks, logos and graphics (collectively “Trademarks”) appearing on Mitel's Internet sites or in its publi

cations are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel")

or others. Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at

[email protected] for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please

refer to the website:

http://www.mitel.com/trademarks

®,™ Trademark of Mitel Networks Corporation

Содержание MiVoice 5000





























Результаты поиска

Содержание MiVoice 5000

Отзывы:

Бренды по названию

Популярные бренды

Mitel MiVoice 5000, Руководство по установке

Результаты поиска

Содержание MiVoice 5000

Отзывы:

Бренды по названию

Популярные бренды