Mitel M685i, Руководство по установке

Страница: 7 / 16

Installation
3
INSTALLATION
The M685i Expansion Module connects to the right side of the 6865i, 6867i, and 6869i IP phone
via the connector plate.
CONNECTING THE M685I EXPANSION MODULE TO YOUR PHONE
Use the following procedure to connect the M685i Expansion Module to your IP phone:
1. Locate and remove the two connector plate insertion area rubber caps on the right side of
the phone.
2. Turn your phone over so that the back of the phone is facing you.
3. Turn your M685i Expansion Module over so that the back of the module is facing you.
4. If connecting the module to the 6865i, using a #2 Philips head screwdriver, insert the two
8mm screws in the holes labelled B and C and proceed to Step 4.
or
If connecting the module to the 6867i or 6869i, extend the connector plate by gently pulling
the connector plate to the right and using a #2 Philips head screwdriver, screw in the two
8mm screws in the holes labelled A and C.
Rubber
Caps
x
x
A B
D
A B
D
Pull to
Extend
Unextended Connector
Plate (6865i)
Extended Connector
Plate (6867i/6869i)
C
C
A
B