background image

 

 

28 

Mitel Networks 

5330 IP Phone 

To end a Handsfree Answerback call: 



 Press either      (

SPEAKER

) or      (

CANCEL

). 

 
When the Handsfree Direct Page call ends, the MUTE key light returns to the 
state it was in before the call was established. 
 

Direct Paging - Handsfree Answerback Disabled

 

Your administrator enables or disables Handsfree Answerback and you can 
also turn it on or off on your phone. To turn Handsfree Answerback off, see 
"Direct Paging - Handsfree Answerback Enabled" elsewhere in this guide. 
When Handsfree Answerback is disabled on your phone and you receive a 
Direct Page, the Direct Page is indicated by a single burst of tone. 
 
To answer Direct Page calls when Handsfree Answerback is disabled: 

 
Phone state before Page arrives: 

To answer the Direct Page 

 

(indicated by single burst of tone): 

Phone is idle and MUTE is OFF. 

1. Check that MUTE is ON solid. 

 

2. Lift the handset 

OR 

press MUTE 

 

key to answer in Handsfree mode. 

 

(The light turns OFF.) 

 

3. Begin speaking. 

 
You are on a handset call or 

1. Check that MUTE is flashing. 

headset call, and MUTE is OFF 

2. Press MUTE. The light turns ON  

 

solid and and you are now speaking to 

 

the paging party and have MUTED 

 

your handset/headset call. 

 

3. Speak to the paging party. Press 

 

MUTE to alternate between handset 

 and 

handsfree 

calls. 

 
You are on a MUTED 

The party paging you receives a busy 

handset/headset call, OR, you are 

tone. Handsfree Answerback does not 

on a Handsfree call 

interrupt your call. 

 
To end a Direct Page call, do one of the following: 



Hang up the handset to end a handset call. 



Press      (

SPEAKER

) to end a Handsfree call. 



Press      (

CANCEL

). 

 
When the Handsfree Direct Page call ends, the (MUTE) key light returns to the 
state it was in before the call was established. 

Содержание IP 5330













































Отзывы: