manualshive.com logo in svg

Mitel Inter-Tel Axxess, Руководство администратора, Страница: 191 / 384

Поделиться
Скачать
Mitel Inter-Tel Axxess Скачать руководство пользователя страница 191

Page  175

“DKTS Alternate Transient Display Timer” Station Flag and Timer

System Features

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0,

 

May 2008

“DKTS ALTERNATE TRANSIENT DISPLAY TIMER” STATION FLAG AND TIMER

As an alternative to (or in addition to) disabling the call transfer and message transient dis-
plays, as previously described, the programmer can use a combination of a station flag and a
timer to control 

all

 of the station’s transient displays (not just the call transfer and message dis-

plays). The “DKTS Alternate Transient Display Timer” station flag, if enabled, allows all tran-
sient displays to be controlled by the “DKTS Alternate Transient Display” timer.

The “DKTS Alternate Transient Display” timer can be set to 1-255 tenths of a second (0.1-25.5
seconds). The default value is 10 tenths of a second (1 second). This timer affects only those
Inter-Tel endpoints with the “DKTS Alternate Transient Display Timer” flag enabled.

“TRANSIENT CALL INDICATION ON CALL ANSWER” STATION FLAG

This programmable station flag determines whether the station user will see a call display
when answering a call by pressing a secondary extension button or by reverse transferring. If
enabled, the display will tell if the call was ringing, recalling, transferred, or holding at the
other station.

 

USER-PROGRAMMABLE FEATURE BUTTONS

NOTE:  

This feature does not apply to single-line sets.

Individual Inter-Tel endpoint buttons can be designated “user-programmable” in the keymaps
during database programming. The installer can program the default feature codes, and the sta-
tion user can reprogram the feature codes as desired. Default endpoint feature codes are shown
on 

page 86

. Up to 35 user-programmable endpoint buttons can be programmed to enter any of

the general feature codes. 

Inter-Tel display endpoints have a special 

 key if the buttons are in the default state,

however, it can be programmed to use any of the Forward feature codes. When the 

 but-

ton is pressed, the display shows a menu of call forwarding options. The user must then select
the desired option by pressing the corresponding button next to the display. If the 

 but-

ton is programmed to use any other Forward feature code (355-358), the forwarding options
will not be displayed when the 

 button is pressed. Any Inter-Tel endpoint user can make

any user-programmable button a 

 button that uses any one of the forwarding feature

codes (355-358). 

Secondary extension buttons (described on 

page 87

) can be assigned to user-programmable

buttons during keymap programming. If so, the endpoint user can determine the primary sta-
tion that is associated with the secondary extension button by using the feature button pro-
gramming procedures given below.

To display the current button entries:

1. 

While on-hook, enter the Review Keys code (396). The display shows PRESS THE
KEY TO REVIEW.

2. 

Press the feature or speed-dial button(s) to be displayed. The display shows the feature,
username, or speed dial location name and KEY VALUE:

 (feature code, extension num-

ber, or location code)

. For a secondary extension button, the display shows SECOND-

ARY: 

(station).

FWD

FWD

FWD

FWD

FWD

Содержание Inter-Tel Axxess

































































































































































































































































































































































































Отзывы:

Нет отзывов