Mitel Inter-Tel Axxess, Руководство администратора, Страница: 151 / 384

Page 135 Hunt Group Remove/Replace and Do-Not-Disturb
System Features
Inter-Tel
®
Axxess
®
Administrator Guide — Issue 11.0, May 2008
HUNT GROUP REMOVE/REPLACE AND DO-NOT-DISTURB
Hunt group members can temporarily stop hunt group calls from ringing at their stations by
entering the Hunt Group Remove feature code as described below. (If a station is assigned to
more than one hunt group, this halts calls from all hunt groups. Hunt group assignments cannot
be removed individually.) Do-Not-Disturb can also be used to halt hunt group and other
calls
to the station (see page 265 for details).
NOTE:
This feature has no effect on ACD hunt groups. See page 145 for ACD login/logout
information.
When the Hunt Group Remove feature is enabled, the user will still receive the camp-on dis-
play and tone, and the individual trunk button flashes, if one exists, for calls to the hunt group.
(The station continues to receive calls placed to its extension number.) Hunt group overflow
and announcement stations cannot block hunt group calls using this feature.
If an endpoint user has programmed a button for entering the Hunt Group Remove/Replace
feature code, and if that button has a lamp, the lamp will be lit whenever the station is removed
from the hunt group.
To remove the station from its hunt group(s) or replace the station in its hunt group(s):
Inter-Tel Endpoints: While on- or off-hook, enter the Hunt Group Remove feature code (322)
to halt hunt group calls or enter the Hunt Group Replace feature code (323) to return the station
to its hunt group(s). Or, use the Hunt Group On/Off feature code (324) to toggle the hunt group
mode on or off. You hear a confirmation tone, and the display shows ACCEPT (or DIVERT)
HUNT GROUP CALLS.
If off-hook, hang up.
Single-Line Sets: Lift the handset and enter the Hunt Group Remove feature code (322) to halt
hunt group calls or enter the Hunt Group Replace feature code (323) to return the station to its
hunt group(s). Or, use the Hunt Group On/Off feature code (324) to toggle the hunt group
mode on or off. You hear dial tone.