Mitel 6800 Series, Руководство администратора

Страница: 352 / 1113

Mitel 6800 Series SIP Phone Release 4.2.0 SP2 Administrator Guide
5-89
PREFERRED LINE AND PREFERRED LINE TIMEOUT
An Administrator or User can define a
preferred line
as well as a
preferred timeout
. If a
preferred line is selected, after a call ends (incoming or outgoing), the display switches back
to the preferred line. Next time you go off-hook, you pickup on the preferred line. You can specify
the number of seconds it takes for the phone to switch back to the preferred line using the
“
preferred timeout
” parameter.
An Administrator can configure the “
preferred line
” and the “
preferred timeout
” parameters
using the configuration files or the Mitel Web UI. A User can configure these parameters using
the Mitel Web UI only.
The following table provides the behavior of the preferred line focus feature with other features
on the phone.
CONFIGURING THE PREFERRED LINE AND PREFERRED LINE TIMEOUT
You use the following procedures to configure the Preferred Line and the Preferred Line Timeout
on the IP Phones.
PHONE
FEATURE PREFERRED LINE BEHAVIOR
Call Return The phone switches back to the focused line immediately after the call ends.
Speeddial The line is already specified when the speeddial is created. The phone switches back
immediately after the call ends.
Conference For incoming calls, the phone switches back immediately after the call ends.
Transfer For incoming or outgoing calls, the current behavior is that the same line used to
transfer the call does not change. For incoming calls, the phone switches back
immediately after the call transfers.
BLF The phone switches back immediately after the call ends.
Park The phone switches back immediately after the call ends.
Voicemail The phone switches back immediately after the call ends.
Redial The phone switches back immediately after the call ends.
Dialing For incomplete dialing on a non-preferred line, the focus does not change if some digits
are entered.
If no digits are entered or digits were cleared, the focus changes to preferred line after
the time out has passed without activities.
Caller ID If the "Switch UI Focus To Ringing Line" parameter is disabled, the User is able to see
the Caller ID when the phone switches the focus to the ringing line.
Factory
Default Factory default and recovery mode clears the "preferred line" and "preferred line
timeout" parameters, and the phone operates in a non-preferred line mode.
Notes:
1.
If you specify a value of “
0
” for the
preferred line
parameter, it disables the preferred
line focus feature.
2.
If you specify a value of “
0
” for the
preferred line timeout
parameter, the phone
returns the line to the preferred line immediately.