Mitel 612 DECT Скачать руководство пользователя страница 12

Страница: 12 / 116

Mitel 622 DECT Phone

eud-1720/1.0 – R3.0 – 08.2015

Product and safety information

Warranty Repair Services

Procedure: Should the product fail during the warranty period and you wish to make a

claim under this express warranty, please contact the Mitel authorized reseller who sold

you this product (details as per the invoice) and present proof of purchase. You will be

responsible for shipping charges, if any.
Limitation of liability for products not of a kind ordinarily acquired for personal, domestic or

household use or consumption (e.g. goods/services ordinarily supplied for business-use).

After Warranty Service

Mitel offers ongoing repair and support for this product. If you are not otherwise entitled to

a remedy for a failure to comply with a guarantee that cannot be excluded under the Aus-

tralian Consumer Law, this service provides repair or replacement of your Mitel product,

at Mitel's option, for a fixed charge. You are responsible for all shipping charges. For fur-

ther information and shipping instructions contact:

Limitation of liability

1.1 To the extent permitted by law and subject to clause 1.2 below, the liability

of Mitel to you for any non-compliance with a statutory guarantee or loss or

damage arising out of or in connection with the supply of goods or services

(whether for tort (including negligence), statute, custom, law or on any

other basis) is limited to:
a) in the case of services:

i) the resupply of the services; or
ii) the payment of the cost of resupply; and

b) in the case of goods:

i) the replacement of the goods or the supply of equivalent goods; or
ii) the repair of the goods; or
iii) the payment of the cost of replacing the goods or of acquiring equiv-

alent goods; or

iv) the payment of the cost of having the goods repaired.

1.2 Clause 1.1 is not intended to have the effect of excluding, restricting or

modifying:
a) the application of all or any of the provisions of Part 5-4 of Schedule 2

to the Competition and Consumer Act 2010 (the ACL); or

b) the exercise of a right conferred by such a provision; or
c) any liability of Mitel in relation to a failure to comply with a guarantee

that applies under Division 1 of Part 3-2 of the ACL to a supply of goods

or services.

Содержание 612 DECT





















































































































Результаты поиска

Содержание 612 DECT

Отзывы:

Похожие инструкции для 612 DECT

Бренды по названию

Популярные бренды

Mitel 612 DECT, Руководство пользователя

Результаты поиска

Содержание 612 DECT

Отзывы:

Похожие инструкции для 612 DECT

Бренды по названию

Популярные бренды