- 6 -
To de-activate Phone Lock:
•
Press the Phone Lock feature key or enter the Phone Unlock Feature Access code.
•
Enter your user PIN to unlock the set.
Note
: If a user PIN has not been assigned, enter # when prompted for the PIN to unlock the
phone.
User PIN
A Personal Identification Number (PIN) allows a user to access features that require a PIN,
for example, to log into a set such as a hot desk user or generic SIP user.
It can also be used to de-activate the Phone Lock feature. PINs must be from 0 to 8 digits in
length. Only digits (0 to 9) are permitted. The default PIN is blank (length zero).
Users will have one generic PIN that can be used for any required features.
The User PIN initially has a zero length, allowing a user, for example, to unlock a phone
using a blank PIN for Phone Lock. Setting the User PIN on the set requires the PIN to have at
least one digit.
See the procedures below for changing a User PIN.
5215 IP Phone, 5215 IP Phone (Dual Mode), 5220 IP Phone, and 5220 IP Phone (Dual
Mode):
To change the User PIN:
1.
Press SuperKey.
2.
Press
No
until "Set User PIN?" appears.
3.
Press * or the
Yes
softkey or the
User PIN
softkey.
4.
At the prompt "Enter Old PIN", enter your old User PIN.
5.
Press
Enter
.
6.
At the prompt "Enter new PIN", enter your new PIN (can be 1-8 digits in length,
consisting only of the digits 0-9, inclusive). Use the left arrow key to correct
mistakes.
7.
Press
Enter
.
8.
At the prompt to verify the PIN, re-enter your new PIN again. The set confirms
successful or failed completion.
9.
Press
Superkey
to end the Superkey session.