Mitek CD30P-SQ, Руководство пользователя

Страница: 4 / 8

4
Getting Started
This camera is equipped with standard accessories such as batteries, and
this section will tell you how to use them on the camera.
Replace Batteries
The battery box is located at the lower part of the back of camera, and
you must use two AAA batteries. If you want to replace the batteries:
1 .Open the battery box
2.Load the batteries correctly; when you load the batteries, please place the
batteries according to the pole directions for batteries on the battery
boxClose the battery box cover.
Precautions
When you use the USB cable to connect the camera with a computer, it is
unnecessary to use the batteries because the camera can use the power
provided by the computer through the USB interface.
Warning
1. Do not open the battery box cover at will, and the power cut will cause
the photos in the camera missing.
2. When the battery power is low, the characters on the LCD will flash.
Please download the photos in the camera into the computer as soon as
possible for fear of the loss of photos in the camera.
3. If you do not use this camera for quite a long period, please take out
of the batteries for fear of the discharging or corrosion of the batteries.
4. Please do not put the batteries into fire for fear of explosion to cause
people injured or damage the environment.
5. Please do not use the manganous batteries and do not mix-use new
batteries and used batteries. Suggest using AAA size alkaline batteries.
Automatically enter the energy saving status.
In order to save the energies of batteries, if the camera is not used in 20
seconds, the camera will automatically enter the energy saving status.
Software Installation
Please place the CD into the CD-ROM and the software will automatically
run the installation wizard; please follow the directions of the installation
wizard.
If the auto run function in your computer is closed, you must manually
install the software according to the following steps.
1. Enter E (E is your CD-Rom) .
2. Please follow the directions of the installation wizard.