MITECH MFD500B Скачать руководство пользователя страница 35

Страница: 35 / 38

[email protected]

instrument cleaners: water, a mild household cleaner or alcohol (no methyl alcohol).

Attention:

Do not use any methyl alcohol, solvents, or dye penetrated cleaners!

The plastic parts can be damaged or embrittled by these.

6.2 Care of the Batteries

Capacity and life of batteries mainly depend on the correct handling. Please therefore observe the tips

below.

You should charge the batteries in the following cases:



Before the initial startup



After a storage time of 3 months or longer



After frequent partial discharge

6.3 Maintenance

The instrument requires basically no maintenance.

Attention:

Repair work may only be carried out by authorized Service staff of us.

6.4 Warranty

When used in accordance with the manufacturer’s written instructions and under normal operating

conditions, the instrument is conditionally guaranteed to be free from defects in material and

workmanship for a period of two years from date of shipment.
This warranty shall not apply to equipment subjected to misuse or abuse, improper installation, alteration,

neglect, or accident. Excluded from this warranty are expendable items such as transducers,

interconnecting cables, and batteries.
This warranty is limited to the original purchaser and is not transferable. No other warranty, expressed or

implied, is made.

6.5 Tips on Safety

The design of the instrument meets safety standard. During the operation, it shall meet the specified

external ambient condition, and the operator shall be furnished with concerned technology background,

so as to guarantee safe operation.

Note:



This instrument is a non-destructive inspection instrument for inspecting material, it is not

allowed to use as a medical instrument.



The instrument is limited to be used in lab and industrial environment.

Содержание MFD500B







































Результаты поиска

Содержание MFD500B

Отзывы:

Бренды по названию

Популярные бренды

MITECH MFD500B, Руководство пользователя

Результаты поиска

Содержание MFD500B

Отзывы:

Бренды по названию

Популярные бренды