Aligning the instrumentation
Note: Foster barriers are already pre-aligned by the manufacturer. In the event of
problems arising during alignment, follow the procedure described below.
Aligning the transmitter assembly (transmitter)
Reference value:
approx 4V
(see pages 12 and 13)
1. Connect the tester to one of the main
RX
expansion
boards using the small
(red-black) cable supplied.
2. Move the test jumper on the
TX
base board
to position
ON
3. Move the jumper test on the first
TX
expansion board
to position
ON
.
Foster
– Installation and Use Manual
Page
11
of 16
