Panel specification
ON/OFF Key Switch
1. When Key is in the ON position , start [Z7 ~ Z8 ] Armed
* To start [Z1 ~Z6] alarm by keyboard or Remote Key.
2. System is Disarmed completely when Key is in the OFF position ,defence zone of
[Z1~Z8] fail.
*Must use the key OFF to Disarmed switch system when trigger alarm
Digital Keypad
Enter correct password to start [Z1~Z6] normal armed and Disarmed. It can’t Disarmed
when trigger alarm, and must use the panel key OFF to Disarmed.
*Keys in the OFF position, keyboard and Remote Key function is fail
Function indicator
[ON] 1. System switch indicates the KEY-Switch is ON position, LED long bright.
KEY Switch is OFF position when the lights go out
2. Password programming instructions - flash slowly when the system is
programmed state
[POWER] Power LED, long bright is power supply normally
[READY] System ready LED, it is bright means all defence zone are normal (all
zones are the NC state)
[ALARM] system Alarm LED, it is bright when the defence zone that is armed was
triggered unnormal
[ARMED] system armed LED ,it will flash and then long bright when start the keyboard
or start armed of Remote Key.
LED of defence zone
【
Z1~Z8
】
1. Went out : The defence zone is in the NC state when Disarmed (circuit normal)
2. Light on: The defence zone is in the NC state when Disarmed (circuit unnormal)
3. Fast Flash: In the armed state, when any zone is triggered, the zone indicator will
become fast flash
4. Slow flash: When the defence zone is triggered the LED fast flash ,then turn the
panel key to OFF position, LED slow flash.
