Mitchell & Johnson SAP201V, Руководство пользователя

Страница: 9 / 22

Page 10
© Mitchell & Johnson UK 2012 SAP201V IB Ver 1.0 Rev 0.0
Inserting/changing batteries
Remove the battery compartment cover carefully.
Remove the used battery.
Insert a new CR2025 lithium battery, observing the correct
polarity as displayed inside the remote.
Push in the cover until it clicks.
Information on handling batteries and rechargeable
batteries
Please adhere to the following information when handling
batteries and rechargeable batteries.
-
Keep batteries out of children’s reach.
-
Batteries are hazardous and do not
belong in household waste.
-
Ensure correct polarity when inserting
batteries.
-
Always remove batteries when the remote
control is not in use for long periods of
time.
-
Never leave batteries lying around
unsupervised. If swallowed these could
pose a choking hazard to children and
pets. Seek emergency medical care
immediately, should this happen.
-
Never expose batteries to extreme
temperatures, such as sunlight, fire, ovens,
etc. there is a risk of explosion!
-
Make sure that batteries are not
dismantled, short-circuited or are thrown
into fire. Never re-charge non-
rechargeable batteries. There is a risk of
explosion!
-
Always follow the manufacturer's
instructions when recharging
rechargeable batteries.
-
Touching leaking or damaged batteries
could cause skin burns. Use protective
gloves suitable for handling such batteries.
-
Always ensure that the device has been
turned off after use.
-
Always change/replace all batteries at
the same time.
-
If required clean battery and device
contacts before inserting,