MiTAC PH12LI, Руководство по эксплуатации продукта, Страница: 44 / 83

44
2.11 Intel ® Ethernet Network Connection i217-LM - 88:88:88:88:87:88
Main Advanced Chipset Boot Security Save & Exit
PORT CONFIGURATION MENU
Item help
►
NIC Configuration
Blink LEDs (range 0 -15 seconds) 0
PORT CONFIGURATION INFORMATION
UEFI Driver: Intel ® 1GbE DEV 5.1.00
→←
: Select Screen
Adapter PBA: FFFFFF-0FF
↑↓
: Select Item
Chip Type Intel PCH LPT
Enter: Select
PCI Device ID 153A
+/- : Change Opt
PCI Bus:Device:Function: 0:25:0
F1: General Help
Link Status: [Disconnected]
F2: Previous Values
Factory MAC Address: 88:88:88:88:87:88
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Version 2.15.1326. Copyright (C) 2012 American Megatrends, Inc.
Field Name NIC Configuration
Help Click to configure the network device port.
Comment Press Enter when selected to go into the associated Sub-Menu.
Field Name Blink LEDs
Default Value 0
Possible Value 0 - 15
Help Blink LEDs for the specified duration (up to 15 seconds).
Field Name UEFI Driver:
Default Value Installed UEFI Driver Name
Comment This field is not selectable. There is no help text associated with it.
Field Name Adapter PBA:
Default Value Adapter PBA number
Comment This field is not selectable. There is no help text associated with it.
Field Name Chip Type:
Default Value Chip Type Name
Comment This field is not selectable. There is no help text associated with it.
Field Name PCI Device ID:
Default Value I217 PCI Device ID number
Comment This field is not selectable. There is no help text associated with it.