5
1.2
Setting Up Your Pocket PC for Use
Performing Initial Startup
Initial startup includes installing the battery, setting the backup battery switch
and completing the Welcome Wizard.
1.
The backup battery switch should be set to the
ON (right) position for normal operation. Pull
out the stylus and use it to slide the battery switch
to the ON (right) position.
2.
Insert the battery into the battery compartment.
The battery lock should click into place.
CAUTION:
(
Always leave the backup battery switch in the ON position unless you need to perform a
hard reset. A hard reset will cause the memory of your Pocket PC to be cleared.
(
If you keep the backup battery switch in the OFF position, you can still use the Pocket
PC. However, once you remove the battery or reset your Pocket PC, the Pocket PC will
restore the factory default factory state and all data stored in RAM (including the files
and programs you added) will be lost.
3.
Replace the battery door and slide the battery lock to the lock position.
4.
The red notification indicator on your Pocket PC will flash for
approximately 30 seconds. Then your Pocket PC will automatically turn on
and display the Welcome screen.
