MiTAC Getac W130, Руководство оператора

Страница: 62 / 140

Managing Power
3-4
NOTE:
l
Charging will not start if the battery’s temperature is below 0
°
C (32
°
F) or above
40
°
C (104
°
F).
l
The charging process will stop when the battery’s temperature gets above 60
°
C
(140
°
F). If this happens, the battery pack may be damaged, please contact your
dealer.
l
During charging, do not disconnect the AC adapter before the battery has been
fully charged; otherwise you will get a prematurely charged battery.
To charge the battery pack, connect the AC adapter to the computer and
an electrical outlet. The Battery Charge Indicator LED on the computer
glows orange to indicate that charging is in progress. You are advised to
keep the computer power off while the battery is being charged. When
the battery is fully charged, the Battery Charge Indicator LED glows
green.
It takes approximately 3 and half hours to fully charge the battery pack
when the computer is off. The battery pack may become warm during
charging or normal use. This is completely normal.
It takes approximately 90 minutes to charge the battery pack to 80%
capacity and two or three more hours to fully charge the battery pack.
CAUTION: After the computer has been fully recharged, do not immediately
disconnect and reconnect the AC adapter to charge it again. Doing so may damage
the battery.
NOTE: The battery level may automatically lessen due to the self-discharge process
(0.21% per day), even when the battery pack is fully charged (100%). This happens
no matter if the battery pack is installed in the computer.