Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 21
2.6.2
Menu “Data”
This menu item shows saved measurement results sorted according to
date.
Already measured sites can be activated and measured again (s. Fig.
18). The measured value is displayed on the right hand site of the
display. If more than one measurement result is available for a site, the
last three values are shown.
Relocate measuring sites
After the data set is activated, the site can be measured again by
pressing the
key. The device will go to the measurement menu and
take the site information of the saved data set. If a saved data set
contains GPS information, the measuring site can be relocated with the
help of this information. The distance and direction from the current
position to the saved position will be displayed on the right side of the
screen (s. Fig. 19). This requires that current GPS data can be
received.
Fig. 19 Dataset display
Fig. 18 Menu - Data
Relocate measuring
site:
1.
Select measuring site
2.
To “Remeasure” select
button
3.
Distance and direction are
displayed
