Device manual of MISUMI Video Server
Page
6 of 29
Connect Video Server to network
Once the power status is OK.the
LED in red located at the rear panel
of Video Server should light-up.
Connect camera
Connect Video Server to your hub/switch by using a normal RJ45 cable, plug the
RJ45 cable into the Ethernet connector locate at the rear panel of the Video Server,
another side connect to your hub/switch.
Connect Power Supply
Connect Power Supply DC 5V
Ensure your power adapter specification
matchs your power system (ex 110V or 220V)
Connect the adapter to the outlet.
Connect power jack
Connect camera
Connect the Video Server and power source with the adapter provided, plug the
power adapter into the DC 5V Connector. Once the power status is OK, the LED in
red located at the rear panel of Video Server should light-up.
How to reset
Load Video Server Default Settings
reset
