The IESH-MB205G-R
switch supports dual +12~48V
DC
power inputs and changes relay status when power
failure occurs.
1.
Insert the positive and negative wires into the V+ and
V- contacts on the terminal block connector.
2.
Tighten the wire-clamps screws to prevent the DC
wires coming loose.
Warning: This is a Class A product. In domestic
environment this product may cause radio interference
in which case the user may be required to take adequate
measures.
Warning: This product is intended to be supplied by a
Listed Power Adapter or DC power source, rate 12 ~ 48
VDC, 1.5A; Tma 60 degree C, if need further assistance,
please contact Advantech for further information.
DIN-rail Mounting
1.
Installing the DIN-Rail Mounting Kit.
2.
Removing the DIN-Rail.
Wall Mounting
1.
Attach the brackets included to the switch with
screws.
2.
With the brackets attached, hang the switch to nails
on the wall.
Startup Manual 2
1
2
Mounting
Overview
Power Connection
Wire Range
