103
4.1.5 Other function
4.1.5.1 Change the Speed Table（SPD Key）
Press SPD key at the driving mode, display as bellows.:
←： Count down the speed table number of X(Z,V) each time one presses the key
→： Count up the speed table number of X(Z,V) each time one presses the key
↑： Count up the speed table number of Y(U,W) each time one presses the key
↓： Count down the speed table number of Y(U,W) each time one presses the key
ENTER： Complete to change, return to driving mode screen
ESC： Return to driving mode screen without change
※ Can be changed speed table during driving.
4.1.5.2 Change the axis（Link key）
Press Link key at the all axis display screen(included parameter setting screen), selection axis change
XＹ→ZU→VW→XY…. Can be changed displaying axis during driving.
4.1.5.3 Changes current position（POS Key）
At the each axis is stopped , and displayed the driving mode(CNT/STP/ABS/ORG/HOM),
press POS key, display
”
*
”
, selected axis with ↑、↓ key.
After selected axis, press Enter key, change
”
*
”
to
”
→
”
. Can be entering the arbitrary position with
numeric keypad. Return to
“
*
”
if press ESC key over 1 sec.
“
→
”
will be disappeared.
When press ESC key over 1 sec., return to
“
*
”
. After complete, press Enter key,
”
→
”
will be changed
to
”
*
”
with coordinate setting. Press POS key, return to driving mode.
C X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
axis
C * X 1 2 3 4 5 6 7 8 p < 0
Y - 9 8 7 6 5 . 4 3 2 u > 1
Cursor
X S p e e d ( ) : 2
Y S p e e d ( ) : 3
axis
Speed table number
Содержание DS102MS
Страница 166: ...166...
