Tread new hose supplied with kit
from hot water valve to side-kick
whipper bowl using the higher of the
holes drilled in step # 10
Use tube holder under ledge to
secure hose behind brewer. Step # 25
Place brewer back inside machine
along with spout bracket.
Using tube supplied with kit tread hose
from bottom of whipper bowl to spout
bracket as shown above and re-connect
chocolate hose.
26)
27)
28)
Platinum Brewer Installation.
Thread whipper motor wires dis-
connected in step # 18 towards the
front of the machine and plug into
small Gray extension supplied with
kit.
Disconnect wires going to chocolate
valve and plug into extension. (exten-
sion has double connectors)
Plug new set of connectors into
chocolate valve.
29)
30)
31)
Re -assemble side-kick by installing
whipper motor cover and door.
Re-assemble Avalon.
32)
33)
Page 4
(Side-Kick Avalon)
Mistral
TECHNOLOGIES
