Mistral MUJ10, Быстрый старт

Страница: 4 / 8

4
Congratulations on the purchase of your new Mistral
jug. Before using your new jug, it is important that
you read and follow the instructions in this Use and
Care booklet, even if you feel that you are quite
familiar with this appliance. Find a place to keep
this booklet handy for future reference. Attention
is drawn to the section dealing with ‘IMPORTANT
SAFEGUARDS’.
This appliance has been designed to operate from a
standard domestic power outlet. It is not intended
for industrial or commercial use.
Before First Use
• Carefully unpack your jug and all its accessories.
Remove all packaging materials and discard or
retain for future use.
• Ensure that the voltage of your electricity supply
is the same as that indicated on the rating label
on the appliance.
• Wipe over the body of the jug with a soft, dry or
damp sponge or cloth.
• Fill the jug to the maximum level indicated on the
MAX Water Mark, and boil the water. Drain this
water before first time use to ensure the jug is
completely clean.
Operation
• Fill the jug by opening the lid and filling with
water.
• Fill the jug to the desired level. Take care NOT
to over fill above the ‘MAX’ level indicated on
the water gauge as water may eject from the
jug during boiling. Always use fresh water for
each usage and discard any boiled water that
is not used.
• Replace the lid on the jug.
• The jug must be on a DRY and LEVEL surface.
• Place the jug onto the power base. The electrical
connections will be made automatically as the jug
rests on the 360° connector on the power base.
• Insert the plug into a power outlet and switch on.
• Switch on by pressing the ‘ON/OFF’ switch
downwards. The power indicator light illuminates
to indicate that the jug is in use.
• When the water has boiled, the jug and the light
will switch off automatically. To re-boil the jug,
the water can be brought back to the boil by
depressing the ‘ON’ button. If the automatic ‘OFF’
switch has just operated it may be necessary
to wait for a few seconds before the switch can
be reset. You can stop the boiling process at
any time by gently lifting the ‘ON/OFF’ switch or
turning ‘OFF’ at the powerpoint.
• If the jug is lifted from its powerbase during
the boiling process, the ‘ON/Off’ switch will
automatically switch the jug off and can be reset
by simply depressing the switch back to the ‘ON’
position to resume boiling.
Your Mistral Stainless
Steel Jug How To Use Your
Mistral Jug
Maximum Water
Level Mark