6
Fig.9
Important Note:
The pedestal fan can be assembled at 2
dedicated heights of either 123 cm or 170
cm respectively by excluding or including
the middle tube section as part of the total
assembly as shown in Fig.10
If electing to assemble the Pedestal Fan to
the 123 cm height than simply omit step 2 (
Assembling middle tube) on page 4 .
Attention: Do not connect the fan to
electrical supply until the unit is fully
assembled.
Fig.10
Operation of Your
Pedestal Fan
How To Use
Place the fan in a flat and stable surface. Make
sure the fan Switch /Speed control knob is set in
Off (0) position then connect the plug to main
power outlet.
To select the desired speed, rotate the Switch/
Speed control knob at back of the motor
housing; the selected speed setting number must
align with the indicator mark (white dot) on the
motor housing.
The pedestal fan features 6 dedicated setting as
shown in Fig.11 and table below:
Fig.11
Indicator Mark
0 = Off
1 = Minimum speed
2 = Medium speed
3 = Maximum speed
1
= Minimum speed with left/right oscillation
2
= Medium speed with left/right oscillation
3
= Maximum speed with left/right oscillation
The pedestal fan features a blue illuminating rim
light positioned between the motor housing and
switch control panel.
This rim light illuminates when the pedestal fan is
operating in any of the 3 Speed or Speed/Osc
combo settings and extinguishes when switched
to the OFF position.
Unplug the fan from the electrical outlet when
it is not in use or is left unattended. Do not leave
this fan unattended while it is in use.
