Mistral MMW25SS, Руководство по эксплуатации

Страница: 8 / 16

8 8
Display
Cooking time, power, indicators and present time
are displayed.
Convection
Press to program convection temperature.
Combination
Press to set combination cooking (cooking with both
convection heat and microwave) program.
Micro Power
Press to select microwave power level.
Adjust
Press to select the amount of food or enter cooking
time required.
Quick Start/Start
Press to start cooking program or set quick start
cooking program.
Stop/Reset
Touch to stop cooking program or clear all previous
settings before cooking starts.
Timer/Clock
Press to set timer or clock.
Menu Function Adjusting (Dial)
Rotate to set cooking time or select auto-menu.
Note: Display screen is easiest to read if viewed
from eye level. Indicators at the top of the
screen may be obscured from sight if viewed
from above the appliance.
How To Set The Oven
Controls
Basic Operations
BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the entry, check
and try again.
SETTING THE CLOCK
You can set the oven clock when the oven has just
been plugged in or at a later date.
When the Oven has just been plugged in, the screen
prompt will display “Enter Clock Time.” At this point
skip the first step below and proceed with steps
“2-5”.
To set the clock at a later date, take the following
steps:
1. Press and hold down “TIMER/CLOCK” button
for 2 seconds until “Enter Clock Time” prompt
shows.
2. Rotate the “Menu Function Adjusting” dial until
the correct hour is displayed.
3. Press “TIMER/CLOCK” button.
4. Rotate the “Menu Function Adjusting” dial until
the correct minute is displayed .
5. Press “TIMER/CLOCK” button to verify time. The
clock then starts counting.
Note: This is a 12-hour clock. When the oven is
first plugged in or when power resumes after a
power interruption, the display will show ENTER
CLOCK TIME, if you prefer to not have the clock
displayed, press RESET button. If you attempt
to enter an incorrect time, the time will not be
set and a error signal tone will sound. Press
the CLOCK button and re-enter the time. You
can check the clock time while cooking is in
progress by pressing the CLOCK button.
Microwave Control Panel
12:30