11
Infrared Remote control
Battery Replacing (For Remote Control)
1. The remote control requires one “CR2025”
type 3-volt lithium battery (included). If the
operation of the remote control becomes
unsatisfactory, replace with a new 3-volt
lithium battery.
2. Place the remote control with the control
buttons facing downward.
3. Loosen the cover screw, Press the locking arm
of the battery cover and pull out the tray.
(Push tab “A” towards the middle first. See the
Fig.1).
4. Place one new 3V CR2025 battery into the
battery tray with the positive “+” side facing
up, observing the polarity markings. If the
battery is placed incorrectly, the remote
control will not work. CAUTION: There is
danger of malfunction if the battery is
replaced incorrectly. Replace only with the
same or equivalent type of battery.
5. Insert the battery holder into the battery
compartment and ensure it is secured.
tighten the cover screw.
6. Tell others about the risk associated with
button batteries and how to keep their
children safe.
Thermal Safety Cut-out
This appliance is fitted with a safety cut out,
which will operate if the heater overheats (eg,
due to blocked air outlet). For safety reasons,
the heater will NOT automatically reset. To reset
the heater, disconnect the heater from the
power outlet. Let the heater cool down before
reconnecting the heater to the power outlet and
switching it back on.
WARNING: In order to avoid a hazard due
to inadvertently resetting the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
Technical Specifications
Power Supply: AC 220-240V ~ 50Hz
Power Consumption: 1800W
NOTE: As a result of continual
improvements, the design and
specifications of the product within may
differ slightly to the unit illustrated on the
packaging.
