Mistral MF850UBY21, Инструкция по эксплуатации

Страница: 8 / 12

8
Control Panel
Dimmer
adjustable button
1000W heating
select button
2000W heating
select button
Power ON/OFF Switch
1. Power ON/OFF Switch: Press the power switch
once to switch On power, push the power
switch button once again to turn main power
off.
2. Dimmer adjustable Button: Press once the
O/I button to turn on the appliance and fire
effect. A red indicator light will appear to
indicate that the function is ON. Press the
O/I button for 3 seconds this will operate the
dimmer mode.
3. 1000W Heating select button: Press the 1000W
button once for the low heat settings; press
twice to switch off the heat setting.
4. 2000W Heating select button: Press the 2000W
button once for the high heat settings; press
twice to switch off the heat setting.
Remote control
Power
ON/OFF switch
1000W heating
select button
Dimmer
adjustable
button
2000W heating
select button
1. In order to operate the heater with the
remote control, the ON/OFF switch on the
heater itself must be in the ON(I) position.
2. It takes some time for the receiver to respond
to the transmitter. Do not PRESS the buttons
more than once within two seconds for
correct operation.
3. the ON/OFF button once on the remote
control to activate the flame Effect aspect of
the heater, press button again to turn it OFF.
4. Press the 1000W button once for the low heat
settings; press twice to switch off the heat
setting.
5. Press the 2000W button once for the high
heat settings; press twice to switch off the
heat setting.
6. Press the DIMMER button in order to operate
the light intensity dimming by selecting one of
5 light intensity levels that you desire.
Battery installations: Open the battery cover.
Insert 2x 1.5V AAA batteries in the battery
compartment.
Reattach battery cover.
Note: Make sure the batteries are installed
correctly in the remote control by aligning
the +/- polarity marking in the battery
compartment with the batteries.