7
5.
Adjustable Mist amount
Increase or decrease the amount of mist by
turning the mist adjusting dial until desired
intensity is reached.
Oscillation Setting
To incorporate the oscillating operation into the
Misting fan you need to secure the oscillating
actuator arm to the mounting hole at the edge of
the oscillating rotor disc and secure with washer
and adjustment screw.
Note: To operate misting fan without
Oscillation, connect and secure actuator
arm to the center mounting hole of the
rotor disc.
Fan height adjustable
Unscrew A and then extend draw tube to adjust
the height of mist fan.
A
B
Care and Cleaning
To clean: Disconnect the power cord from the
mains. Remove the Front Guard and the blades
carefully. Do not drop the blades! First use a soft
cloth with light soap to clean off oil stains, then
wipe thoroughly with a dry cloth. Never use polish
or any corrosive liquid that will damage the paint,
metal or plastic! Replace the blades and lock the
guard securely before use.
- Never spray with liquids or submerge the
Misting Fan in water or any other liquid.
- Do not fill the water tank with water over 45°C,
to avoid discoloration or deformation.
- When ambient temperature is near or below
0°C, remove all water from in and around
the tank to prevent ice forming, which could
damage components.
- Do not fill water anywhere other than the
water tank. Mop up any spills immediately.
WARNING: Unplug from electrical supply source
before cleaning or filling / emptying the water
tank. After servicing, any safety device (including
grilles and blades) must be reinstalled or
remounted as previously installed.
