Mistral MAAT-X7, Инструкция по эксплуатации

Страница: 6 / 12

Wearing the Earbuds
1. Choose one pair of eartips that suit you and install them onto left/right earbuds
securely. Please try medium eartips at first as they fit most of the people.
2. Identify the left and right earbuds.
3. Put the earbuds into your ears and adjust to find best angle with Mic(microphone)
downwards. Shake head to check wearing stability.
Note:
If the sensor doesn’t touch the ear securely, the earbud may not work normally.
Re-wear the earbud to make it close to the ear if no sound outputs during using.
When the sensor on the earbud detects that the earbud is pulled out of the ear, the
earbud will pause the music automatically. When the earbud is put on again, the music
will resume to play automatically.
Pairing
1. Make sure the earbuds are fully charged. Open the charging case, the earbuds
will enter pairing mode automatically after 3 seconds and is ready to pair with a
Bluetooth device (e.g. a mobile phone).
2. Pair the earbuds with your Bluetooth device. Enable the Bluetooth pairing function
on your Bluetooth device and search for “MAAT-X7” to pair and connect. Refer to
the user manual of your Bluetooth device.
3. Bluetooth earbuds can remember previously paired device. Simply activate the
Bluetooth in your device and open the charging case. The earbuds will reconnect to
the last connected Bluetooth device automatically. If the last connected Bluetooth
device is unavailable and you want to connect it to other Bluetooth device, you
have to go to the Bluetooth menu of your device and connect the earbuds to the
Bluetooth device manually.
4. Remove the earbuds from the charging case for using.
Tips:
The earbuds cannot connect to more than 1 device at the same time. If you have two
paired Bluetooth devices, only turn on the Bluetooth function of the device that you
want to connect.