In
odu
ion
Congratulations on your purchase of the Mission
Gemini 2-P guitar speaker. This product is designed to
be intuitive to setup and operate, and to provide many
years of trouble free service.
However, we recommend that you take a few
moments to read through this User Guide in order
to get the best possible experience with your new
speaker.
bAck
ound
The Gemini 2-P is a professional quality, passive
stereo speaker cabinet specifically designed for use
with software based music systems such as guitar
modeling amplifiers, cabinet simulators, and digital
audio workstations.
A traditional guitar speaker cabinet is typically
designed to work best in conjunction with a guitar
amplifier. The speaker works within a limited
frequency range, and the cabinet and speaker
themselves contribute to the overall tone. While this
works perfectly with an analog guitar rig, it is not
always an ideal solution for digital systems.
Software based modelers usually implement
guitar cabinet simulators designed to emulate
specific speaker cabinets in software. If the signal
subsequently passes through a physical speaker
cabinet with its own tonal characteristics, it colors
the eventual tone, making the modeling less accurate.
Additionally, guitar speaker cabinets do not often
work well with signals other than guitar such as
keyboards, vocals, and playing back recorded music.
The Mission Gemini amplifiers and cabinets resolve
these problems as they are specifically designed to
work with software based music systems.
k
s
The Gemini 2-P is a passive stereo speaker cabinet
designed to faithfully reproduce a modeled signal
chain. The cabinet is fitted with 2 x 12” low frequency
drivers, and 2 x 1” high frequency compression drivers
in a co-axial configuration: The high frequency drivers
are mounted in the center of the low frequency
drivers.
The Coaxial driver configuration has been used for
over sixty years in professional audio monitoring and
high-end audiophile applications. The benefits include
a wider field of dispersion that’s more uniform across
the frequency spectrum. This means listeners do not
have to be positioned directly in front of the speaker
to get the best experience. The full frequency range
also appears to the listener to originate from a single
source, without any apparent physical separation
between low and high frequencies. Since the high
frequency driver is located at the center of the driver,
the cabinet can be used with a microphone, with
the high frequencies accentuated as the microphone
is positioned towards the center of the speaker,
replicating the on/off axis positioning of a traditional
guitar cab. These features make the Gemini 2-P ideal
for live, recording, and monitoring use.
REcommEndEd
Amplifi
s
The Gemini 2-P works best with solid state power
amplifiers rated between 50w and 250w RMS into 8
ohms or tube amplifiers rated between 10w and 75w
RMS into 8 ohms. Amplifiers rated at higher than the
recommended output power can certainly be used,
but care should be taken not to consistently input
greater than the recommended levels as damage to
the drivers can occur.
Gemini passive cabinets feature a protection circuit
that reduces the likelihood of damage to the high
frequency driver if power should exceed recommended
levels. An analog compressor tracks the source
material and provides almost 5dB of attenuation at
peak power. This feature protects the driver from
damage while maintaining the musical quality of the
signal.
ConnE
ions
There are two inputs on the rear panel of the Gemini
2-P. Connect the output from the left channel of your
power amplifier to the input marked left, and the
right channel from your power amplifier to the input
marked right.
Gemini cabinets use a combination connector that
supports either Speakon or ¼” jack connections.
Speakon cables are recommended if available as they
provide a safer and more reliable connection in most
cases. If these are not available, standard ¼” TS
guitar cables can be used.
Ecifi
tions
Power Handling
250W RMS
Frequency Response 66Hz - 20KHz +_ 2dB
Crossover
Passive at 2.5KHz
Impedance
8 Ohm
Inputs
Combo Speakon ¼” jack
dimEnsions
Width 28” (711mm)
Height 20” (508mm)
Depth 12” (305mm)
Weight 60lbs (27kg)