damage while maintaining the musical quality of the
signal.
ConnE
ions
There is one input and one output on the rear panel
of the Gemini 1-P. Connect the output of one channel
of your power amplifier to the input of the Gemini.
If you have one or more amplifiers with multiple
channels you can connect Gemini 1-P cabinets to
each channel to increase the overall sound pressure
level and/or to support stereo or other multi-channel
audio signals.
Gemini cabinets use a combination connector that
supports either Speakon or ¼” jack connections.
Speakon cables are recommended, if available, as
they provide a safer and more reliable connection in
most cases. If these are not available a standard ¼”
TS guitar cable can be used.
The output allows two Gemini cabinets to be linked
together in parallel to a single power amp channel.
Connect the output from the amplifier to the input
on the Gemini cabinet #1. Connect the output from
cabinet #1 to the input on cabinet #2. Again, either
Speakon or ¼” cables can be used.
Please note that in parallel configuration, the speakers
will present a 4 ohm impedance rather than the 8
ohm impedance of a single cabinet. It is important to
make sure that your power amplifier is designed to
operate with a 4 ohm load. Using parallel mode with
amplifiers not intended for use with 4 ohm speakers
can result in permanent damage to the amplifier and
speaker drivers. Double check this with your amplifier
manufacturer if you are not sure, before connecting
the Gemini 1-P in parallel mode.
WARNING
It is not recommended to exceed two
cabinets connected in parallel mode. Connecting three
cabinets will present a 2 ohm impedance. Most amplifiers
are not intended to be used with 2 ohm speaker drivers,
and damage to the amplifier may result.
Mission Engin
ring
Inc.
www.missionengineering.com
Mission Engineering Inc. 2014. All rights reserved. GEMINI 1-P
is a Trademark of Mission Engineering Inc. Trademarks, registered
trademarks, product names, logos and other materials are the
property of their respective owners.
SAf
y
In
ru
ions
Read, Keep & Follow these instructions
Heed all warnings
Clean only with dry cloth
Do not use this apparatus near water
Do not expose the apparatus to dripping or
splashing and ensure that no objects filled with
liquids, shall be placed on the apparatus
WARNING: To reduce the risk of fire or electric
shock do not expose this apparatus to rain or
moisture
Unplug this apparatus during lightning storms or
when unused for long periods of time
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions
Only use attachments/accessories specified by
the manufacturer
Prolonged listening at high volume levels may
cause irreparable hearing loss and/or damage.
Always be sure to practice “safe listening.”
Refer all servicing to qualified service personnel.
Service is required when the apparatus has been
damaged in any way, such as:
- power-supply cord or plug is damaged
- liquid has been spilled or objects have fallen
into the apparatus
- the unit has been exposed to rain or moisture.
- the unit is dropped or the enclosure is
damaged
- the unit does not operate normally or changes
in performance in a significant way
Dismantling, rewiring, removing components or
otherwise altering the function of the unit may
cause unexpected behavior and will invalidate
the warranty.
MULti
k
configuRAtion
Ecifi
tions
Power Handling
250W RMS
Frequency Response 66Hz - 20KHz +_ 2dB
Crossover
Passive at 2.5KHz
Impedance
8 Ohm
Input
Combo Speakon ¼” jack
Output
Combo Speakon ¼” jack
dimEnsions
Width 24” (610mm)
Height 20” (508mm)
Depth 12” (305mm)
Weight 42lbs (19kg)
Gemini 1-P
#1
Gemini 1-P
#2
Gemini 1-P
#1
Gemini 1-P
#2
Modeler
2 Channel Power Amp
1 Channel Power Amp
Modeler
Stereo
Mono (Parallel)
8 Ohm
8 Ohm
4 Ohm
L
R
L+R summed (mono
)
