13
TO TURN ON THE FIRE PIT
1. Turn the control knob to OFF( ) position (Figure a) and turn on the valve on the gas cylinder
2. Press down and turn the control knob to HIGH ( ) ( Figure b ) postition ( anti-clockwise 90º )
and hold for 5 seconds to purge gas through to the burner head until the main flame is ignited.
Release the control knob 10 seconds after the ignition.
3. Turn the control knob to LOW ( ) (Figure c) and leave it there for 5 minutes or more before
turning the knob to desired temperature setting.
4. If the burner flame goes out, turn off the fire pit and wait at least 5 minutes or more to let the
gas dissipate before re-lighting to avoid gas explosion. Repeat steps 2 to 3.
Figure a
Figure b
Figure c
San Diego, CA 92110, USA
www.missionhillsfurniture.com
OPERATION INSTRUCTIONS
Dec-05-2016
OFF
OFF
OFF
