Guangzhou Miss Lighting Technology Co.,Ltd
200W Beam Moving Head Light
2
1. Packing List
200W beam Moving Head Light 1 pcs
User Manual 1 pcs
1.5 M Signal Cable 1 pcs
1.2M x0.75 mm2 Power Cable 1 pcs
2. Specification
Model: ML-M02
Lamp: YODN 5R
Color temperature : 8000K
Lifetime: 2000H
Channels mode: 16 channels
Pan Scan: 540°(8/16bit high-precision scan) Electronic error correction
Tilt Scan: 250°(8/16bit high-precision scan) Electronic error correction
Color wheel: 14 white
Gobo wheel: 17 gobos + white
Dimmer: 0-100% linear dimmer
Atomization: 0-100% of the soft effect
Angle: 3 °
Display: high-definition LCD screen
IP: IP20
Voltage: AC110-240V, 50/60HZ
Power: 320W
Packing: Carton / Flight case Optional
3. Installation Method
3.1 Installation Steps
1.
Please hand this light into the suitable place with suitable angel.
2.
To connect the signal cable, plug one side into IN socket in the back of light and plug another
side into OUT signal connector in the DMX 512 board(signal input: 1=>Ground, 2=>Data,
3=>data+).
3.
To connect the cable and put into power, them the light stay in the status to receive the
operation signal like : Music, Automatic, DMX512ect. Take note: Please out off the power
line if you will not operate it for a certain time.
3.2 Fixture Linking
To run your light shows of one or more fixtures using DMX-512 controller or to run
synchronized shows on two or more fixtures in master/slave operating mode , you need DMX
cables to link the units from DMX IN to DMX OUT.
