background image

 SHENZHEN MISENSE  COMMUNICATION TECHNOLOGY CO., LTD.

 

 

WWW.MISENSECOM.COM

                                                                             

Page 1/16

 

1.

 

Product introduction 

1.1

 

Product summarise 

         

MS-E8221 is the Central Office mainfram box platform of 

GEPON series products which is researched and developed by 

our company; it is Able to provide a variety of integrated 

services access, such as broadband, voice, IPTV, CATV. 

It includes 2 independent fiber terminals (OLT) unit and 2 

SFP GE uplink port, 1 console port, 1 Of-band management port, 

1 RS485 port. 

All the GEPON series products of our company are using 

passive optical network (PON) technologies, which is better 

than traditional access products in cost performance, 

maintenance, expansibility and etc. 

1.2

 

Functional features   

1.2.1.

 

EPON port Functional features 

In GEPON system, as the OLT unit, PON port is responsible 

for the register of ONU, transfers the Ethernet message received 

from network in the downlink to EPON optical signal, and sent 

it to ONU by passive network. In up link,

Содержание MS-E8221



















Отзывы: