14
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent,
or steel wool/scouring pads which will scratch and damage surface. Do not use products containing chlorine
bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
OXVWHUDQGJUDLQ$OZD\VVFUXEOLJKWO\XVLQJDPLFUR¿EHURUFOHDQFRWWRQFORWKDQGZLWKJUDLQ
6WDLQOHVV6WHHO%DIÀH)LOWHUV
7KHVWDLQOHVVVWHHOEDIÀH¿OWHUVDUHLQWHQGHGWRWUDSUHVLGXHDQGJUHDVHIURPFRRNLQJ$OWKRXJKWKH¿OWHUV
should never need replacing, they are required to be cleaned every 30 days or more often depending on
cooking habits.
)LOWHUVPD\EHSODFHGLQGLVKZDVKHUDWORZKHDWRUVRDNHGLQKRWVRDS\ZDWHU'U\¿OWHUVDQGUHLQVWDOOEHIRUH
using hood.
5HPRYLQJ%DIÀH)LOWHUV)LJ
3XOO¿OWHUWRZDUGIURQWRIUDQJHKRRGXVLQJKDQGOHV
3LYRWUHDURI¿OWHUGRZQZDUG
5HPRYH¿OWHUE\SXOOLQJDZD\IURPKRRG
1
2
3
Maintenance –
Cleaning and Filter Removal
Fig.01
Cleaning the Grease Tray
The grease tray is intended to catch residue and grease that may drip
IURPWKHEDIÀH¿OWHUV7KHJUHDVHWUD\VKRXOGEHFOHDQHGZKHQEDIÀH
¿OWHUVDUHFOHDQHG&OHDQWKHJUHDVHWUD\E\VRDNLQJLQKRWVRDS\
water and gently scrubing any residue off with a soft terry cloth. Dry
grease tray and re-install before using hood.
Removing the Grease Tray
Grease tray has a hooked lip that attaches to bottom panel top edge.
Remove grease tray by:
1. Pull up on tray to release from bottom panel.
2. Pull tray out of liner body.
