Mirta MWM 235, Руководство по эксплуатации

Страница: 25 / 36

24
OPERATING INSTRUCTIONS
model
MWM 235
CARE
SCHEMATIC DIAGRAM
Problem Reasons Methods
When the spin
tub stops spinning
No electricity.
The plug isn’t put into socket.
The timer is in «zero».
The upper cover isn’t Ье closed. After having electricity, it will work.
Put the plug into socket.
Adjust the timer.
Close the upper cover.
When the vibration
is large
The clothes isn’t placed evenly.
Between the inner tub and outer tub, there
is the clothes.
The machine isn’t placed evenly.
Afresh place the clothes.
Take the clothes out.
Put the drier оп the smooth ground.
When the turning
is slow
Тоо much clothes.
The drain pipe isn’t put down and too
much water is in the tub.
Reduce the clothes of the tub.
Put the drain pipe down.
When the spin tub
has the noice The safety cover isn’t put into it and the
clothes is out of the tub.
Put the safety cover i nto it.
When the water сап
not Ье drained better
The outlet of the drain pipe highs more
than 20cm than ground.
When cold, water isn’t drained up to cause
into ice.
There is something ln the outer tub. Lower the drain pipe.
Add the warm water into it to melt
ice {Тhе water temperature сап not
exceed sot)