When in use, please ensure that the plug, socket and heater are free of dust and dirt.
When disconnecting the heater from the mains supply, please turn off the switch at the mains
socket, then unplug the heater by pulling the plug, not the power cord. Do not operate the
heater or your mains supply with wet hands.
Do not extend the power cord.
Check the power cord regularly for wear and damage. Should there be any damage to the
power cord, plug or socket, do not use the heater. The power cord should be replaced or
repaired by either the manufacturer or a qualified electrician.
Do not use a heater that has sustained any damage or been discarded under any circumstances.
The heater should not be installed directly above the mains power supply or socket.
The power cord should be safely tucked away behind the heater when in use, and should not
be placed in front of the heater, or hung off it.
Do not use the heater in areas with gasoline, paint or other flammable liquids or materials are
stored.
If the heater is installed in a bathroom, please ensure it is installed as far away as possible from
any bath tub, shower, sink or toilet. The heater should not be installed in such a location where
it could fall into a bath tub or any other water container.
Take extra care when leaving the heater running whilst unattended, or when asleep.
Do not insert anything into the heater.
Do not touch the heater when in use, and ensure that the heater has been off for a considerable
length of time before touching it.
Should you need to move the heater, please ensure you disconnect it from the mains supply,
give it ample time to cool down before moving it.
3
